HU103M010N200A
CapXon HU snap-in capacitor, 10000 uF at 10 V, Ø25 x 20 mm, 105 °C for low-voltage hold-up and filtering.
The HU103M010N200A is a CapXon HU series snap-in aluminum electrolytic capacitor rated at 10 V with 10000 uF, in a compact case of about 25 mm diameter by 20 mm long. The HU series is a 105 °C snap-in range with a 2000-hour endurance and a very high capacitance for its case size, which makes it a good fit for low-voltage bulk capacitance and hold-up where board space is limited. A snap-in capacitor mounts directly on the printed circuit board with two terminals, which gives a firm mechanical and electrical connection without a clamp and simplifies assembly. The 10000 uF capacitance at 10 V suits low-voltage rails such as 5 V and 12 V buses, where a large capacitance smooths the output and supports a load transient, and the operating temperature range of -40 °C to +105 °C covers most industrial and consumer enclosures. The standardized terminal spacing drops into a common snap-in footprint. Typical uses include the output bulk capacitance of a low-voltage switching supply, a 12 V industrial bus and the filtering of a motor-drive auxiliary rail. Every capacitor BeiLuo ships is factory-traceable and includes an import declaration, a certificate of origin and a RoHS compliance file. Our FAE team helps you size the capacitance and the ripple and estimate the lifetime from the case temperature.
FAE Professional Review
The HU103M010N200A packs 10000 uF into a 25 x 20 mm snap-in can, which is ideal for low-voltage hold-up and filtering where board space is tight. It is a general-purpose 105 °C part, so verify the ripple margin and the case temperature for your duty. The snap-in terminals keep assembly simple, and the standardized layout makes substitution straightforward.
| Parameter | Value |
|---|---|
| Capacitance | 10000 uF |
| Voltage | 10 V |
| Case Size | Ø25 x 20 mm |
| Temperature | -40 °C to +105 °C |
| Endurance | 2000 h at 105 °C |
Application Circuits
Low-voltage bulk capacitance
Reference circuits and application schematics for Low-voltage bulk capacitance are available from our FAE team.
12 V bus hold-up
Reference circuits and application schematics for 12 V bus hold-up are available from our FAE team.
Motor-drive auxiliary filtering
Reference circuits and application schematics for Motor-drive auxiliary filtering are available from our FAE team.
Need a reference schematic or design review? Our FAE engineers can share verified circuits and layout guidance for this part.
Related Documents
Alternative Part Numbers
| Model | Package | Note | Action |
|---|---|---|---|
| HU152M100N350A | Snap-in Ø25 x 35 mm | Higher-voltage 100 V snap-in capacitor in a taller case | View |
Complementary Part Numbers
| Model | Package | Note | Action |
|---|---|---|---|
| KM471M035G160A | Radial Ø10 x 16 mm | Radial capacitor for a lower-voltage control rail | View |
| KY101M400I450A | Radial Ø13 x 45 mm | Slim radial high-voltage capacitor for a control-stage rail | View |
Recommended Complementary Products
Frequently Asked Questions
What projects suit the HU103M010N200A?
It suits low-voltage rails such as a 5 V or 12 V bus that need a large capacitance in a compact part, such as hold-up and filtering in switching supplies and low-voltage converters. The 10000 uF capacitance fits a 25 x 20 mm snap-in can.
Confirm the ripple margin and the case temperature for your duty.
How much ripple can it handle?
The rated ripple current depends on the case temperature and the frequency, so check the datasheet ripple rating at your conditions and keep within it. At low voltage and high capacitance the ripple rating is generous, but a hot layout still reduces life.
Our FAE team can confirm the ripple margin.
Is the part genuine and documented?
BeiLuo supplies factory-traceable HU103M010N200A capacitors with an import declaration, certificate of origin and RoHS file on every order. Stock is normally available and the datasheet downloads from this page.
Order a sample to validate the part before volume production.